EP000 Ensign Soil Pipe 100mm x 3M

Code article : 156563

Description

The Ensign Soil pipe will give you a high quality product that will perform during installation and through the life of the building. The pipes are manufactured through a special process called the De Lavaud process, which gives greater impact and crush resistance, but also a surface hardness which is easy to cut. The coatings, fire and acoustic performance of the pipes and the total system will give you and the building occupants the peace of mind that the best system has been installed.

Product variants

Article DN dn Angle Length Height Width Weight
156363 50 - 3000 58 58 12.9
156455 70 - 3000 78 78 17.6
156563 100 - 3000 110 110 25.1
156736 125 - 3000 135 135 35.3
156827 150 - 3000 160 160 42.1
156951 200 - 3000 210 210 69.1
157049 250 - 3000 274 274 99.5
157114 300 - 3000 326 326 129.4
157171 400 - 3000 429 429 179.5
157187 500 - 3000 532 532 247.6
157203 600 - 3000 635 635 325.5

All dimensions are in mm and nominal weights are in kg

Technical infos & product description

Product description

The Ensign Soil pipe will give you a high quality product that will perform during installation and through the life of the building. The pipes are manufactured through a special process called the De Lavaud process, which gives greater impact and crush resistance, but also a surface hardness which is easy to cut. The coatings, fire and acoustic performance of the pipes and the total system will give you and the building occupants the peace of mind that the best system has been installed.

Recommended use :

  • Domestic use
  • Fat Wastewater
  • Hot effluents
  • Hydrocarbon Wastewater
  • Rainwater
  • Runoff water
  • Industrial Wastewater

Major benefits :

Pipes coated internally with a two part epoxy and externally with a red protective coating.

Technical infos


  • Hot water resistance: 24h at 95°C. 
  • Thermal cycle resistance: 1500 cycles between 15°C and 93°C. 
  • Chemical resistance for 2 ≤ pH ≤ 12. 
  • Salt spray resistance: more than 1500 h 

Coating description :

  • External coating : Red-brown, anti-corrosive acrylic primer paint, average dry film thickness 40 μm. 
  • Internal coating : Two-component ochre colored epoxy coating, average dry film thickness of 130 μm.
  • Material : Cast Iron
  • Industry product standards : BS EN877
  • Range Fire Classification : A1
  • Acoustic Performance : Lsc ≤ 5dB(A) according to EN 14366
  • Percentage of Recycled Content : 99%
  • Recycling Information : Virtually 100% Recyclable